The installation of your new boat lettering is very simple. We supply an instruction guide and an installation squeegee with your order. We recommend using a wet application using Windex so the lettering lays on the soapy water instead of the boat. This gives you time to move the lettering into the exact position you want it. Your lettering will arrive on a wax backing paper, laid up and spaced out just the way you wanted it with a covering of transfer tape on the front to make sure it goes on perfectly. Once the lettering is in place, you tape it up, remove the wax backing paper, spray it with Windex, and then squeegee the liquid out. Once the liquid is removed, your new lettering will adhere to your vessel, and then you simply peel back the transfer tape to see your new lettering installed. The normal installation takes about 30 minutes, and again, we supply a step-by- step instruction sheet and squeegee with each order.